Name: Rim Sprocket, 404"-8 Standard 7
Brand: Oregon Products
SKU: 13313

This product has been discontinued. To see if there’s a substitution that meets your needs, please contact Technical Services at 800-223-5168 or use our Part Finder.

Quick Links:

Specifications, Details & Support

Rims provide smoother cutting and less chain wear than spur sprockets.

Product Details

Pitch: .404", Size: Standard 7 Spline, Tooth Count: 8
Two-piece design includes a drum with a replaceable rim, allowing rim to be replaced multiple times before the entire unit is replaced
Extend operational life by maximizing chain and bar groove alignment
For best performance, replace every three rims

Specifications, Details & Support

Sprocket
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.404"
Sprocket Tooth Count Sprocket Tooth Count Your saw may be compatible with various drive sprockets. If this is the case, a smaller tooth-count will deliver more speed, while a larger tooth-count will deliver more torque (useful on smaller saws). Tooth-count may also influence the drive link count on replacement chain.	8.0

General
Volume	3724.12 cm³
Product UOM	Each
Weight (with Packaging)	0.51 kg
Gross Weight Pack	0.0 Lb
Quantity of EA in Pack	10.0
Net Weight Carton	0.24 Lb