Name: Oregon 90F Polesaw Chain for 6 in. Bar - 28 Drive Links - fits Remington, Milwaukee and Craftsman
Brand: Oregon Products
SKU: 90F028G

Oregon 90F Polesaw Chain for 6 in. Bar - 28 Drive Links - fits Remington, Milwaukee and Craftsman

This product is only available through retailers or servicing dealers.

Shop Retailers Find a Local Dealer

Quick Links:

Specifications, Details & Support Model Fit Guide

The Oregon 90F028G Full House Sequence AdvanceCut Saw Chain is ideal for landscapers and homeowners using small, low powered pole saws. The .043" gauge increases efficiency since they need less power from the saw than standard gauge cutting systems. This chain fits Remington, Milwaukee and Craftsman

Product Details

Pitch: 3/8" Low Profile™, gauge: .043", narrow kerf, drive link count: 28
LubriTec™ keeps your chain and guide bar oiled for less friction and longer life
Top-Plate Filing Indicators make accurate sharpening easier
For pole saw sizes up to 42 cc
Always use narrow kerf chain in combination with narrow kerf designed bars
This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.

Specifications, Details & Support

Saw Chain
Product Family	AdvanceCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link..	3/8" Low Profile™
Chain Type	90F
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.043"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	28.0
Bar Length	6"
File Size	5/32"

General
Product UOM	Each
Weight (with Packaging)	1.23 Lb
Net Weight Carton	0.0 Lb

Low kickback Saw Chain Warning

Model Fit Guide

Need Help? Contact Customer Service at 800-223-5168 or email us at support@oregonproducts.com

Fit Guide

Related Products

Depth Gauge Tool with Flat File

Depth gauge setting being a major factor affecting any saw chain's level of safety and performance, this depth gauge filing kit including .025" drop-center depth gauge tool and flat file helps the setting easily.

Learn More

Sharpening Kit, 4.5mm (Pouch)

Essential for the maintenance of chain saw chains and guide bars, this complete 3/16" set provides all the tools a professional needs.

Learn More

Round Files, 4.5 mm, 12-Pack

Premium files made with the finest steel using state-of-the-art production and finishing processes for best hand sharpening results on your saw chain.

Learn More

Round Files, 11/64" 4X3 Pack

Learn More