Oregon 60cm Jet Fit Harvester Bar, Left Hand Spray .404

This product has been discontinued. To see if there’s a substitution that meets your needs, please contact Technical Services at 800-223-5168 or use our Part Finder.

Quick Links:

Specifications, Details & Support Parts Cross Reference

SOLID. DEPENDABLE. LONG-LASTING. Solid harvester bar with a patented, specially designed spray channel to apply control agents across the cut stump, which prevents stump-rotting fungus. This bar resists chipping and features outstanding springback. High-grade alloy-steel material and induction-hardened bar rails make it tough and durable. The patented Jet-Fit bar-mount system maximizes productivity. The slotted motor-mount design fits harvester equipment outfitted with automatic chain tensioners and easily slides in and out of the bar clamp. The Jet-Fit is available in .080" gauge.

Product Details

High grade alloy-steel material for durability and long wear capablities
Induction hardened rails that offer superior resistance to rail wear and chipping
Large diameter nose rivets to reduce the risk of rail spreading at the nose
Features spray feature designed apply control agents to prevent stump-rotting fungus across the cut stump

Specifications, Details & Support

Harvester Guide Bars
Product Family	Harvester
Guide Bar Code	HLF
Bar Length	60.96 cm
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.404"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.080"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	71.0
Tail Mount	L163

General
Color	Yellow
Volume	0.49 dm³
Product UOM	Each
Weight (with Packaging)	2.42 kg
Net Weight Carton	26.175 Lb

Parts Cross Reference

Need Help? Contact Customer Service at 800-223-5168 or email us at support@oregonproducts.com

Oregon 60cm Jet Fit Harvester Bar, Left Hand Spray .404" .080" ga (602HLFL163)

Product Details

Specifications, Details & Support

Parts Cross Reference

Replacement Guide

Product Details

Replacement Guide

GB XV

John Deere