Oregon Harvester 18HX Micro Chisel Saw Chain, .404 Pitch, 98 Drive Links (18HX098E)

This product is only available through retailers or servicing dealers.

Quick Links:

Specifications, Details & Support Model Fit Guide

SOLID. DEPENDABLE. LONG-LASTING. Delivering top-notch, reliable cutting performance in demanding conditions. Featuring best-in-class cutters and optimized for highly challenging jobs, Oregon 18HX saw chain delivers maximum cutting efficiency while minimizing your downtime.

Product Details

Micro Chisel Cutter for excellent performance, and cutting speed
Advanced Chrome-Plating: Maximum cutter stay-sharp: holds edge in brutal conditions involving high-speed and cold weather
Oregon patented OCS-01 steel is designed to have long-lasting durability in the toughest conditions.
Thicker drive link: Wider and tougher for increased strength, increased reliabilty, longer life and less binding
18HX presets with the “gold” tie straps must be used with 18HX harvester chain
LubriLink: Helps to keep oil where it's needed, on the chain, directs oil to the critical rivet flange/hole interface
18HX operates best at 3000/8000 (ft/min) power output. Recommended: 8000 ft/min

Specifications, Details & Support

Harvester Saw Chain
Product Family	Harvester
Chain Type	18HX
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.404"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.080"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	98.0
Package Type	Loop
Bar Length	80.0 cm
File Size	5.5 mm

General
Volume	0.41 dm³
Product UOM	Each
Weight (with Packaging)	826.444624 gm
Net Weight Carton	27.33 Lb

Harvester Chain Warning

Model Fit Guide

Need Help? Contact Customer Service at +44 1684 353 774 or email us at customerservice.uk@oregontool.com

Product Details

Fit Guide

CRD Metal Works

Hultdins

Lako

Lako Forest

Logmax

Ponsse