Oregon 60cm Jet Fit Harvester Bar, Solid Nose .404

This product is only available through retailers or servicing dealers.

Quick Links:

Specifications, Details & Support Model Fit Guide

SOLID. DEPENDABLE. LONG-LASTING. This bar resists chipping and features outstanding springback. High-grade alloy-steel material and induction-hardened bar rails make it tough and durable. The patented Jet-Fit bar-mount system maximizes productivity. The slotted motor-mount design fits harvester equipment outfitted with automatic chain tensioners and easily slides in and out of the bar clamp. The Jet-Fit is available in .080" gauge.

Product Details

Made from high grade alloy-steel material for durability and long wear capablities
Induction hardened rails offer superior resistance to rail wear and chipping
Engineered to match harvester powerheads for maximum performance
Large diameter nose rivets reduce the risk of rail spreading at the nose
LubriTec increases the life of your guide bar and saw chain with advanced precision to allow the chain drive links and oil to have closer contact, significantly reducing oil waste
Our straight and square-milled grooves are designed for consistency, stability, and decreased wear
Image shown may not reflect actual bar tail motor mount, check Oregon Harvester Catalog for actual tail mount configurations

Specifications, Details & Support

Harvester Guide Bars
Product Family	Harvester
Guide Bar Code	HS
Bar Length	60.0 cm
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.404"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.080"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	71.0
Tail Mount	L163

General
Color	Yellow
Volume	4533.67 cm³
Product UOM	Each
Weight (with Packaging)	2.34 kg
Product Height	66.29 cm
Product Length	13.46 cm
Product Width	5.08 cm
Net Weight Carton	25.19 Lb

Model Fit Guide

Need Help? Contact Customer Service at +44 1684 353 774 or email us at customerservice.uk@oregontool.com

Oregon 60cm Jet Fit Harvester Bar, Solid Nose .404" .080" ga (602HSFL163)

Product Details

Specifications, Details & Support

Model Fit Guide

Fit Guide

Related Products

Oregon Harvester Nose Kit, Solid Bar 404" .080 ga (101918)

Product Details

Fit Guide

Hultdins

John Deere

Logmax

SP Maskiner

Timberjack

WEILER

Waratah