Oregon Power Mate® Rim Sprocket System 3/8" 7 Small 7

This product is only available through retailers or servicing dealers.

Quick Links:

Rims Sprocket Systems, which include a drum sprocket and rim, provide smoother cutting and less chain wear than spur sprockets.

Product Details

Pitch: 3/8", Size: Small 7 Spline, Tooth Count: 7
Two-piece design includes a drum with a replaceable rim, allowing rim to be replaced multiple times before the entire unit is replaced
Extend operational life by maximizing chain and bar groove alignment
For best performance, replace every three rims
Guideline for replacement: One sprocket will last for the complete life of two chains
The pitch of your sprocket, the pitch of your saw chain, and the pitch of your bar tip must all match
The Cold-forged manufacturing process significantly improves a sprocket’s durability and performance

Sprocket
Sprocket Type	3/8"
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	3/8"
Sprocket Tooth Count Sprocket Tooth Count Your saw may be compatible with various drive sprockets. If this is the case, a smaller tooth-count will deliver more speed, while a larger tooth-count will deliver more torque (useful on smaller saws). Tooth-count may also influence the drive link count on replacement chain.	7.0
Radial Port Included	No
Rims Included	Yes
Wear Indicator	No
Bearing included	No
Spline Size	SM7
Product Family	Oregon

General
Product UOM	Each
Weight (with Packaging)	0.5 Lb

Need Help? Contact Customer Service at 800-223-5168 or email us at oregon.support@oregontool.com