O sabre de motosserra Oregon 150MPBK095 Pro-Lite série 95 é um sabre de 15 pol de corte estreito do tipo ponta em coroa destinado ao corte de madeira limpa para motosserras de tamanho pequeno a médio. Os sabres Oregon Pro-Lite são feitos pensando em lenhadores em tempo integral, oferecendo a melhor combinação de valor e durabilidade profissional. Feito de aço cromo-molibdênio superforte, este sabre possui contorno estreito e corpo de resistência impressionante. É resistente a desgaste e lascamento. A grossura dos laminados laterais é reduzida para que você possa obter todas vantagens do corte estreito ao usá-lo em conjunto com uma corrente de corte estreito 95VPX ou 95TXL de 0,325 pol da Oregon.
Detalhes do produto
A barra e a corrente de corte estreito com passo 0,325 pol devem ser usadas em conjunto.
Especificações, detalhes e suporte
Guide-chaîne
Famille de produit
SpeedCut™
Pas de chaîne
Pas de chaîne
Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
.325"
Jauge
Jauge
Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.
1.3 mm
Nombre de maillons entraineurs
Nombre de maillons entraineurs
The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.
64.0
Longueur du guide
38.0 cm
Queue
K095
Code de guide-chaîne
MPB
Compatible avec Guard Mate
Compatible avec Guard Mate
Guard Mate holes are built into the noses of certain types of Oregon guide bars and allow the attachment of a Guard Mate tip guard to help reduce the risk of kickback.
Não
Intenz
Intenz
Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.
Não
Trait de coupe étroit
Trait de coupe étroit
Thickness of side laminates is reduced to obtain all the advantages of narrow kerf cutting when used in combination with all narrow kerf .325" 95-series chain.
Sim
Rayon de l’embout du guide-chaîne
Petit
Nombre de dents d’embout de pignon
10.0
Général
Couleur
Gris moyen
Volume
260.56 in³
FEO du produit
Ch.
Poids (avec l’emballage)
1.501 Lb
Hauteur du produit
54.99 cm
Longueur du produit
10.54 cm
Largeur du produit
7.36 cm
Guia de compatibilidade de modelos
Precisa de ajuda? Entre em contato com o Atendimento ao Cliente ligando para 04 78 79 48 48 ou enviando um e-mail a contact.fr@oregontool.com
