Saltar al contenido Saltar al menú de navegación

Harvester Safety


 

What is Chain Shot?

What is Chain Shot?

Chain shot is the high velocity separation and ejection of a piece or pieces of cutting chain from the end of a broken chain in saw chain based mechanized harvesting systems. Chain shot potentially exposes both machine operators and bystanders to a risk of serious injury or death. Chain shot typically occurs near the drive end of the cutting system but can also come from the bar tip area. 

How Chain Shot Happens

First, the saw chain breaks.
Second, after a saw chain break, the “free” end of the saw chain begins to whip away from the break.
Third, if the saw chain is not contained by the saw box or a chain shot guard, the broken saw chain’s free end can speed up rapidly, carrying immense dynamic energy. Finally, at the peak of the whip, saw chain pieces may break loose and be ejected at high speed.
Chain Operator and Bystander Safety

Chain Operator and Bystander Safety

 Although the "Shot Cone Zone" reflects the most likely chain shot path, deflections can occur, substantially expanding where chain pieces may travel. To minimize risk, operators should keep out of the Shot Cone Zone. Ground personnel and bystanders should be at least 230 feet away from cutting operations and out of the Shot Cone Zone.

Following these best practices consistently will increase your safety and the life of your cutting system.

Do not use saw chain that:

  • Has broken twice or is severely damaged.
  • Has excessive saw chain stretch or has broken or cracked components.
  • Has loose rivet joints—if you can rotate the rivets with your fingers, they are too loose.

Operational Recommendations

  • Never engage in a cut with yourself, ground personnel, or bystanders in the Shot Cone Zone.
  • Always cut as close to the ground as possible to reduce the distance that any potential ejected pieces could travel.
  • Your cutting systems operates in challenging environments and depend on sufficient lubrication to minimize wear and extend the life of operation.


Minimizing the Risk of a Chain Shot Event

For maximum protection, machines should be equipped with the appropriate safety attachments. Please follow the recommendations below and reference your equipment’s operator manual.

Guards and Shields

Because of the high speeds, high stress, heavy loads, wear factors, and varying levels of repair and maintenance given to saw chain-based mechanized wood harvesters/processors, there is a possibility that saw chain or saw chain pieces can be thrown from the machine at high speed and velocity. Machine operators, ground personnel, and bystanders are exposed to a risk of serious injury or death. Equipment should be equipped with appropriate guards, shields, and window enclosures to minimize the exposure of the operator, ground personnel, and bystanders to the cutting plane and Shot Cone Zone of the cutting system. Bystanders and ground personnel should be kept at least 230 feet way.

Windows
 

  • The glazing of the operator's enclosure window should comply with local codes for impact resistance. The glazing should be replaced if any scratches (or other damage) obstructs the operator's effective viewing of the cutting operation.
  • It should be noted that the UV portion of the light spectrum degrades the properties of polycarbonates and its ability to withstand impact is diminished. Consult your equipment manufacturer or replacement glazing supplier for recommended replacement interval.
  • Before upgrading, always check with your equipment manufacturer as it may change the operational integrity of the operator enclosure.

Chain Catcher
 

A chain catcher can assist in containing thrown saw chain, and is a complement to guards and shields. Replace worn out chain catchers. Please follow the recommendations in your equipment manufacturer’s operators manual.

Chain Shot Guard
 

A chain shot guard is a piece of material mounted behind the drive sprocket. This guard performs two functions:
  • Absorbs the energy of a broken saw chain coming in contact with the saw box, and is designed to prevent saw chain parts from breaking off and being ejected.
  • Acts as an extension of the saw box, designed to reduce the opportunity for thrown saw chain or saw chain parts to escape the saw box.


Chain Speed, Feed Force, Service Life and Safety
 

It is well recognized that higher chain speeds and/or applied feed forces (with attendant power input) generally equates to faster cutting speeds and shorter service life of the saw chain, guide bar, and drive sprocket. In general, higher chain speeds result in increased potential for chain breakage and potential injury. Never operate chain at speeds higher than recommended.

 

 

Advertencia Advertencia: si se exceden las recomendaciones, el sistema de corte puede desgastarse y tener una vida útil más corta. Si se exceden las recomendaciones, puede aumentar el potencial de que se produzcan episodios de golpe de cadena y, posiblemente, una lesión o la muerte. En ningún momento debe usted exceder la velocidad de cadena máxima recomendada.

Related Topics

Sharpening 19HX Chain

Sharpening 19HX Chain

Learn the proper filing recommendations for sharpening Harvester 19HX saw chain.
Anatomy of a Harvester Cutting System

Anatomy of a Harvester Cutting System

Learn what components a Harvester Cutting System is comprised of.
Manual de la cosechadora para madera

Manual de la cosechadora para madera

Obtenga información esencial sobre los productos, el rendimiento y las medidas de seguridad para operar los sistemas de corte de la cosechadora.
Harvester Catalog

Harvester Catalog

A harvesting machine is only as good as its cutting attachments. That’s why discerning consumers choose Oregon.

Encontrar a un distribuidor local

Vaya a nuestro localizador de distribuidores para encontrar un distribuidor de servicio cerca de usted.
Volver arriba