Cargando...

This product is only available through retailers or servicing dealers.

Buscar un distribuidor de servicio

Enlaces rápidos:

Especificaciones, detalles y asistencia Guía de ajuste del modelo

Barra espada de cuerpo sólido para el leñador profesional. La punta sprocket reemplazable elimina la necesidad de comprar una barra nueva.

Detalles del producto

La punta de barra reemplazable elimina la necesidad de comprar una barra nueva.
La punta se conecta con un solo remache y se sujeta firmemente mediante lengüetas de superposición resistentes para un reemplazo fácil.
La punta larga toma la mayoría del maltrato con menos desgaste en la estructura de la barra.
Guías sólidas con excelente resistencia al desgaste y el astillado.
Paso: 3/8 pulg.; calibre: 0,058 pulg.; cantidad de eslabones motrices de la cadena: 52
Compatible con Husqvarna, Solo y otros; para obtener información adicional sobre compatibilidad, consulte el buscador de partes.

Especificaciones, detalles y asistencia

Guide Bar
Product Family	PowerCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	3/8"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	1.5 mm
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	52.0
Bar Length	13"
Tail Mount	D009
Guide Bar Code	RND
Guard Mate Compatible	No
Intenz	No
Narrow Kerf	No
Bar Nose Radius	Large
Sprocket Nose Tooth Count	11.0

General
Color	Grey
Volume	394.34 cm³
Product UOM	Each
Weight (with Packaging)	822.36 gm

Guía de ajuste del modelo

¿Necesita ayuda? Comuníquese con Servicio al cliente al +44 1684 353 774 o envíenos un correo electrónico a customerservice.uk@oregontool.com

Guía de ajuste

Volver arriba

Detalles del producto

Guía de ajuste

Husqvarna