La cadena de motosierra Oregon 150MPBK095 Pro-Lite serie 95 es una barra de punta tipo sprocket de corte angosto de 15" destinada a cortar madera limpia para motosierras de tamaño pequeño a mediano. Las barras Oregon Pro-Lite se fabrican pensando en los leñadores de tiempo completo, ya que ofrecen la mejor combinación de valor y durabilidad profesional. Fabricadas a partir de acero y aleación de cromo molibdeno súper resistente, esta barra cuenta con un contorno delgado y una impresionante resistencia del cuerpo de la barra. Es resistente al desgaste y el astillado. El espesor de los laminados del lado de la barra se reduce de modo que puede obtener todas las ventajas del corte angosto cuando la utiliza en conjunto con la cadena 95VPX y 95TXL de 0,325" de corte angosto de Oregon.
Detalles del producto
La cadena de corte angosto de 0,325" y la barra se deben utilizar juntas.
Especificaciones, detalles y asistencia
Guide Bar
Product Family
SpeedCut™
Pitch
Pitch
Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
.325"
Gauge
Gauge
Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.
1.3 mm
Drive Links
Drive Links
The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.
64.0
Bar Length
15"
Tail Mount
K095
Guide Bar Code
MPB
Guard Mate Compatible
Guard Mate Compatible
Guard Mate holes are built into the noses of certain types of Oregon guide bars and allow the attachment of a Guard Mate tip guard to help reduce the risk of kickback.
No
Intenz
Intenz
Intenz guide bars have our patented Intenz chain tensioning mechanism built right into the bar itself. Replace a Intenz guide bar with another Intenz guide bar to maintain the saw’s ability to properly tension the saw chain.
No
Narrow Kerf
Narrow Kerf
Thickness of side laminates is reduced to obtain all the advantages of narrow kerf cutting when used in combination with all narrow kerf .325" 95-series chain.
Sí
Bar Nose Radius
Small
Sprocket Nose Tooth Count
10.0
General
Color
Medium Grey
Volume
260.56 in³
Product UOM
Each
Weight (with Packaging)
680.841592 gm
Product Height
54.99 cm
Product Length
10.54 cm
Product Width
7.36 cm
Guía de ajuste del modelo
¿Necesita ayuda? Comuníquese con Servicio al cliente al +44 1684 353 774 o envíenos un correo electrónico a customerservice.uk@oregontool.com
